Reasons Your Hot Water Heater Isn't Working

Schedule A Service Call

What are your insights and beliefs on What Would Cause My Electric Water Heater to Stop Working??


No Hot Water — Water Heater Repair
Numerous modern houses make use of an electrical water heater for their furnace, because of its ease and convenience of use. However, similar to any other electrical devices, problems might arise with its use, unexpectedly. It can be truly frustrating to wake up to a cool shower instead of a warm one or having your bathroom with water that isn't warm sufficient or perhaps too warm. Whatever the instance may be, hot water heater problems can be rather aggravating. Thankfully, we have actually made a list of feasible options to your hot water heater issues. There are a number of aspects that can create a lot of these problems, it could be a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety and security. Whatever the problem is, getting it fixed should not position excessive of a concern if you adhere to these actions:

Examine Your Power Supply:


As basic as this may appear, it is very required. Without sufficient power, your water heater will certainly not work. So the first thing to do when your water instantly retires is to validate that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once more. Change any kind of busted or damaged fuse. Test the appliance with power after these changes to see if it's now functioning.

Examine the Burner in the Hot Water Heater:


If it's not a power trouble, after that attempt looking into your burner if it is still working. Evaluate each of your heating elements to be sure the issue isn't with any one of them. If any of them is faulty, replace that part and then check whether the warm water is back on.

Inspect Your Thermostat:


If your water heater still isn't working or the water coming out isn't hot enough, you may need to check the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the access panel and press the red switch for temperature level reset over the thermostat. This need to aid warm the water. Transform the breaker back on as well as inspect if the issue has been dealt with.

Call A Specialist:


If after changing all damaged components as well as resetting your temperature, the water heater still isn't working, you may require to speak to a professional plumber for an expert opinion. The problem with your heating system could be that the cold and hot faucets have been switched or it might be undersized for the quantity of warm water needed in your home. Whatever the instance might be, an expert plumber would help address the trouble.

Final thought


Water heater problems are not constantly major. Many of them result from minor concerns like a blown fuse or worn-out burner. Changing the faulty components ought to do the trick. Nevertheless, if you are still unable to address the issue, give a call to your local plumber to find to get it fixed.

What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    No Hot Water — Water Heater Repair

    We were shown that editorial on No Hot Water — Water Heater Repair through an acquaintance on our other site. Are you aware of someone else who is intrigued by the topic? Take a moment to promote it. I appreciate reading our article about How to Troubleshoot and Repair an Electric Water Heater.




    Get Quote Now

    Leave a Reply

    Your email address will not be published. Required fields are marked *